![background image](http://html1.mh-extra.com/html/zippkits/g30/g30_manual_3806551015.webp)
15
Glue the 1/16 ply (cross grain) stumble block bottom into
the slots on the sponson inside, as well as into the notches
on the outside piece.
You may need to sand a bevel at the front so that the
bottom fits perfectly.
Repeat on the other side.
Glue the radio box top in place. Use epoxy or CA.
When cured, brush a coat of 30 minute epoxy inside
where the sides and bulkheads meet the radio box top.
Flip the boat upside down and allow to cure.
This seals the radio box seams and makes it 100% water
proof.
Summary of Contents for G30
Page 1: ...1 G30 Outboard Tunnel Hull For 21 Nitro or 4S electric Length 30 5 inches Beam 11 5 inches...
Page 24: ...24...
Page 25: ...25...