CLEANING, MAINTENANCE, STORAGE, DISPOSAL
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
73
ZI-MBGS600
16
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
WARNIN G
No cleaning, upkeep, checks or maintenance when machine is running!
Shut off the machine and let it cool down before start servicing!
NOTE:
Before carrying out maintenance on the machine, place the machine on level, firm ground, lower
the attachments to the ground, stop the engine and release the cylinder pressure by operating the levers.
When servicing hydraulic parts, ensure that the hydraulic oil has cooled sufficiently to avoid burns.
Prevent unintentional starting of the machine by turning the key to the "OFF" position. Remove the key.
16.1
Cleaning
Regular cleaning guarantees the long service life of your machine and is a prerequisite for its safe operation.
N OTE
The usage of certain solutions containing ingredients damaging metal surfaces as well as
the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution.
Never use running water or a high pressure cleaner to clean the machine.
Clean the machine daily after finishing work. Do not clean the machine while the engine is running. Water
can enter the air filter and damage the engine. Take care to keep the air filter dry.
16.2
Maintenance
The machine is low-maintenance and only a few parts need to be serviced. Malfunctions or defects that
could affect your safety must be repaired immediately!
•
Before each operation, check the perfect condition of the safety devices.
•
Regularly check the perfect and legible condition of the warning and safety labels of the machine.
•
Use only proper and suitable tools.
•
Use only original spare parts recommended by the manufacturer.
16.2.1
Maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The following
intervals apply when the machine is used within the technical limits:
Compo-
nents
Action
Operatinon hours (OH*)
50
100
150
200
250
300
350
400
450
500
550
600
1000
2000
Fuel
Check
daily
Engine oil
Check
daily
Change
x
x
x
x
x
x
x
x
x
x
x
x
x
x
every
50 OH
Hydraulic
oil
Check
daily
Change
x
x
every
1000
OH
Lubrica-
tion points
Check
daily
Cooling
fan
Check
daily
Electrical
lines
Check
daily
Air cylinder
/ cooling
fan
Clean
daily
Machine
Clean
daily
Battery
Check
x
x
x
x
x
x
x
x
x
x
x
x
x
x
every
50 OH
Greasing of
swing
bearing
teeth
Check
x
x
x
x
x
x
x
x
x
x
x
x
x
x
every
50 OH
Air filter
element**
Clean
x
x
x
x
x
x
x
x
x
x
x
x
x
x
every
50 OH
Change
x
x
x
x
x
every
200 OH
Greasing of
swing ball
bearings
Check
x
x
x
x
x
x
x
x
every
100 OH
Summary of Contents for ZI-MBGS600
