ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
24
ZI-GRM400 | ZI-GRM1100
6.
Remove the spring trough and mount
the finger on the finger plate
(
FIGURE6
)
7.
Mount the finger plate equipped with
fingers back onto the motor shaft
(
FIGURE 7
). Insert feather key into
the motor shaft, slide on finger plate
and fix with screws (M8x20 LEFT
THREAD!).
8.
Place the drum on the machine
(
FIGURE 8
).
NOTE:
The magnet must be
positioned exactly above the
Safety Switch. (note markings).
Fix the drum with the quick-
release fasteners.
Fit out water connection "¾" with
a shut-off valve.