27
Look, a right
and
a left!
Sharp inside corner.
the sheeting. This is where the strange
order comes in. The sheeting is done in this
order because it has to overlap in a specific
way.
Follow along and you won’t have any
trouble. If something doesn’t seem to fit,
stop and find out why. Epoxy is impossible
to remove from foam…
Grab all the sheeting pieces, including the
ones you marked earlier.
Use a file to sharpen the inside corner of
the sponson step as shown.
Use your sanding block with 80 grit paper to
sand the foam flush with both sponson
plates.
Using epoxy, glue R-1 in place on the
