Zipp Manufacturing I-BOX, Building Instructions

Page: 6 / 45

I B O X / N B O X
4
Additional items needed to complete:
§ Gasoline engine with 5 inch mounts
§
.250 Collet for engine (Zenoah type engines)
§ .250 24 inch cable w/welded stub shaft (Zenoah type engines)
§
.250-.250 brass ferrule (sport “trimmer” type engine)
§ 24 inch section of square drive cable (“trimmer” type engine- get from trimmer)
§ ¼ inch stub shaft (“trimmer” type engine)
§
¼ inch thrust bearing (“trimmer” type engine)
§ Tuned pipe or canister muffler (check the rules)
§
2 channel surface radio with 1 standard and 1 heavy duty servo (100 in/oz minimum)
§ Throttle pushrod
§
Rudder pushrod (at least “4-40” size)
§ 2 pushrod seals (Zipp 3404)
§ 16-24 ounce fuel tank and tubing (gasoline compatible)
§ .250 strut (Zipp 3403)
§ .250 drive dog (Zipp 3405)
§
Prather 270 prop (starting point)
§ Prop nuts (Zipp 3406)
§
Cable grease
§ Large rudder (water pickup type- Zipp 3402)
§ 3 feet large silicone tubing (water line)
§ 12 inch length of 11/32 brass tubing
§ 36 inch length of 5/16 brass tubing
§
Floatation (pool noodles, foam, etc.)
§ Transom turn fin (Zipp3410)