Zipp Manufacturing I-BOX, Building Instructions

Page: 7 / 45

I B O X / N B O X
5
Before we can start building, we need to do some prep work. Good prep work
will pay off later with a straight, true running boat.
First, we need a flat work surface. Nothing else will do.
If you don’t have a perfectly flat bench, you can make one with your piece of
12x48 plywood.
Simply screw a couple of 2x4’s lengthwise to the bottom. Make sure the 2x4’s
are straight!
You can then put this on a bench, and shim the corners to make it steady.
Or, if you are really pressed for space, you can set it on a couple of saw
horses.
The Build
We are ready to start the build!
Remember- The boat is being built upside down. Any reference to the top or
bottom refers to the boat’s top or bottom. If you are going to attach something
to the top, it would be closest to the bench. Right and left are always as you
are sitting in the boat, or from the rear.
Got it? If not, stand on your head as you build…
Let’s identify the parts in the sheets. Don’t remove the parts until you actually
need them, as some look similar, but are not the same.