Page 8 of 16
Zip Hydro Tap Installation and Operating Instructions - 81759 - February 2013 v2.01
Font installation procedure
A font kit installation is available for this product and is sold separately as
an accessory. For details of the available font kits, please contact your Zip
customer service provider. The font instalation instructions and mounting
template are supplied with the font kit.
Operating the Tap
Blue Chilled Water Light
On all the time:
This indicates that the unit is ON.
Flashing slowly :
This indicates that the chilled water is not at the right temperature. Wait up to
20 minutes. When the chilled water is at the right temperature, the light will
stop flashing. Note: The Zip HydroTap is designed to dispense chilled water in
the temperature range 5°C to 10°C.
During heavy usage, the temperature can rise out of this range.
Filter Change Light Off: This indicates the filter is operating within its normal
specified lifespan.
Filter Change Light Flashing slowly : The light will flash slowly when the
filter is due for replacement and the LCD will show “Filter Change”. Refer to
“Replacing the filter” section of this document.
Chilled Water Lever
Depressing the “Blue” lever allows dispensing of Chilled water.
Pulling up the Blue lever allows the tap to operate in a “no-touch” mode.
Water will flow from 5 to 15 seconds (factory preset). To reset, return the
handle to the “Off” position and repeat the step. The lever has to be manually
returned to the “Off” position. Should an alternate dispensing time be needed
refer to page 15, Water Dispensing.
Note: On the Chilled only models
the Red LED is blank.
Chilled
Filter Change
CHILLED
CHILLED
