Page 6 of 20
804721- CS_ChillTap Sparkling 09.16 v1.00
2.1
- Ventilation
Proper air circulation must be provided for all Chilled models. The system will operate correctly only if the recommended air
gaps are achieved during Installation. The minimum requirement is for a 50mm air gap either side and 300mm above of the
undersink unit.
It is important that the 4mm door buffers (For all installations ) are fitted to the inside edge of the cupboard door to allow
sufficient air circulation inside the cupboard. (See the diagram below).
• When installing air flow ducts, the following tools will be required:
• Jigsaw and 12mm Drill
• Keyhole or Wall Board saw.
Section 2
Ventilation
50 min.
50 min.
200
min.
382
280
333
Ø 105
Clearance
Envelope
Vent pipe
(Blocked off)
Mains Cold water
isolation valve
240 - 230V,
50Hz GPO
CO
2
cylinder with
fixed 300kPa reguator
Inlet Vent
Carbonation
adjustable
flow valve
435
Clearance
Envelope
4 min,
Bufer Pad
Clear Gap
