background image

Page 4 of 20 

804721- CS_ChillTap Sparkling 09.16 v1.00

1.  Please read all Precautions, Installation Requirements, Installation Instructions before installing any Zip ChillTap.
2.  Never attempt to install any Zip ChillTap without reading all of the applicable instructions. 
3.  All electrical connections must comply with current wiring rules.
4.  This appliance is not designed for use by young children or infirm people without supervision.
5.  Young children should be prevented from having access to ensure they are not able to use or play with the chiller. 
6.  This appliance must be earthed. 
7.  If the power supply cord is damaged it must be replaced by a Zip Service Provider or a qualified electrician. 
8.  The power cord and general power outlet must be in a safe and accessible position after installation.
9.  Do not remove the cover of the appliance under any circumstances without first isolating the appliance from the power 

supply. 

10.  This unit is designed for indoor use and must not be installed outdoors or exposed to the elements of nature. 
11.  This unit must not be positioned in an area that may be cleaned by a water jet.
12.  This unit must not be cleaned by a water jet.
13.  This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, 

or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the 
appliance by a person responsible for their safety. For products sold in Europe, this appliance can be used by children 
aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and 
knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand 
the hazards involved. Children should be supervised to ensure that they do not play with the appliance. Cleaning and user 
maintenance shall not be made by children without supervision.

14.  This appliance is intended to be used in household and similar applications such as

Staff kitchen areas in shops, offices and other working environments;
Farm houses and by clients in hotels, motels and other residential type environments;
Bed and breakfast type environments;
Catering and similar non-retail applications.

15.  The appliance has to be placed in a upright position.

Product Specifications

Model

Power Rating 

(kW)

Refrigerant

Height     

mm

Depth      mm

(including fittings)

Width       

mm

Weight empty  

kg’s  

Weight full  

kg’s  

CS

0.3

134A (100g)

335

442

280

25

26

Read These Warnings First

•  Power supply 220-240V AC 50Hz for connection via a 10amp G.P.O.

•  Operating temperatures 5ºC -  35ºC.

•  External water pressure 250kPa - 700kPa (2.5 bar -7 bar)

•  Internal Pressure Limiting Valve: 500kPa

Note:

 For best results we recommend a minimum static mains water pressure of 250kPa (2.5 bar).

  Frost Protection 

If this appliance is located where the ambient air 
temperature could fall below 5ºC when the heater is not 
in use, do not turn off the appliiance electrically. This safe-
guard does not offer the same protection to the connecting 
pipework and fittings. 

Installation Requirements

Summary of Contents for ChillTap 804721





















Reviews: