5
Installation instructions & user manual
T210023 v1.02 NOV 2018 - ZIP AP430S-AP4100S
Technical support
Tel: 0345 6 005 005 email: service@zipindustries .co.uk www.zipwater.co.uk
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death and/or serious injury and/
or property damage.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in property damage.
Safety Information
WARNINGS
• Installation, commissioning and maintenance of this Aquapoint must only be
carried out by a competent installer, familiar with unvented systems who will
then be responsible for adhering to all relevant standards and regulations.
• The Aquapoint must be permanently connected to the supply through an
isolating switch with a contact separation of at least 3mm in all poles.
•
To protect the Aquapoint, a circuit breaker must be fitted with a rating
suitable for the nomi nal current of the Aquapoint.
• The cross sectional area of the connection cable must be appropriate for
the power rating and location of the Aquapoint.
• The connecting cable must be adequately secured.
• This Aquapoint must be earthed at all times.
• Check that the power supply is switched off prior to electrical connection.
• The
Aquapoint, its wiring and piping must not be modified in any way.
• Do not remove the cover whilst the Aquapoint is connected to the electricity
supply.
• In case of malfunction isolate the power supply immediately. In case of
leaks also isolate the water supply. Repairs must only be carried out by a
competent person.
•
Do not reset the over temperature cut-out until the cause of its operation
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY.
NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE
THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY, AND WILL INVALIDATE THE WARRANTY. RETAIN THESE INSTRUCTIONS FOR
FUTURE USE.
SAFETY INFORMATION
!
!
!
!
!
!
