Zip Aquapoint AP430S SmartEco Installation Instructions & User Manual Download Page 21

21

Installation instructions & user manual

 

T210023 v1.02 NOV 2018 - ZIP AP430S-AP4100S

Technical support 

 

Tel: 0345 6 005 005 email: service@zipindustries .co.uk  www.zipwater.co.uk

The Zip Aquapoint you have chosen is precision-built from the finest materials available and 

should give many years of trouble free service.
Certain warranties may be implied by law into your contract with Zip.  

The warranty provided below is additional to these implied warranties and nothing set out 

below shall limit your statutory rights or rights at law.
Zip Water UK warrants that, should any part fail within 12 calendar months of installation, that 

part will be repaired or replaced free of charge by Zip or its Distributor or Service Provider, 

except as set out below, provided the Aquapoint is installed and used strictly in accordance with 

the instructions supplied, and that failure is not due to accident, misuse, abuse, unsuitable water 

conditions, or to any alteration, modification or repair by any party 

not expressly nominated by 

Zip.
No costs are payable by the customer other than any mileage or 

travelling-time 

charges incurred 

by a Zip Service Provider or the cost of removal, cartage and 

re-installation of any component 

of the Aquapoint if it needs to be returned for repair to Zip or its Distributor.

This  warranty  does  not  cover  damage  resulting  from  non-operation  of 

the  Aquapoint or 

consequential damage to any other goods, furnishings or property.
Zip does not exclude, restrict or modify any liability that cannot be excluded,  restricted or 

modified or which cannot, except to a limited extent, be 

excluded, 

restricted or modified as 

between the owner or user and Zip under the laws applicable.

Furthermore, this warranty does not displace any statutory warranty, but, to the extent to which 

Zip is entitled to do so, the liability of Zip under any statutory warranty will be limited at Zip’s 

option to the replacement of the Aquapoint or supply of equivalent Aquapoint, the payment of 

the cost of replacing the Aquapoint or acquiring an equivalent Aquapoint, or the payment of the 

cost of having the Aquapoint repaired or the repair of the Aquapoint.

Note

 It is our policy to continually improve products and as such we reserve the right to alter 

data, specifications and component parts without prior notice.

To ensure you have the latest revision of this instruction manual visit www.zipwater.co.uk. 

IMPORTANT

 No liability is accepted for incorrect use of this product.

Warranty

Summary of Contents for Aquapoint AP430S SmartEco

























Reviews: