X11 Wireless Broadband Router User manual
Page 47 of 69
Figure 37
z
Radio Band
: The default setting is mixed mode [802.11B/G]. If you do not
know or have both 11g and 11b devices in your network, then keep the
default in mixed mode. From the drop-down manual, you can select
802.11G if you have only 11G card. If you have only 802.11 B card, then
select 802.11B.
z
Radio Mode
: The Route has 3 modes: AP, WDS, AP+WDS
z
SSID
: The SSID is the network name shared among all points in a wireless
network. The SSID must be identical for all devices in the wireless network.
It is case-sensitive and must not exceed 32 characters (use any of the
characters on the keyboard). Make sure this setting is the same for all
points in your wireless network. For added security, you should change the
default SSID (default) to a unique name.
z
Channel
: Select the channel used for wireless communication. There are
11 overlapping channels. Channels 1, 6 and 11are non-overlapping. The
default is channel 6.
z
Click “Apply” when you have finished the configuration above.
z
Please setup authentication and Encryption mode to setup Valid and Safe
wireless connection after setting Basic Wireless parameters.
6.6.2 Advanced Wireless Settings
This tab is used to set up the Router’s advanced wireless functions. These
settings should only be adjusted by an expert administrator as incorrect
settings can reduce wireless performance.
