X11 Wireless Broadband Router User manual
Page 43 of 69
Figure 33
z
PPPoE Account
: Enter the User Name provided by your ISP for the PPPoE
connection
z
PPPoE Password
: Enter the Password provided by your ISP for the PPPoE
connection
z
Physical Address Clone
: Your ISP may require a particular MAC address
in order for you to connect to the Internet. This MAC address is the PC’s
MAC address that your ISP had originally connected your Internet
connection to. Type in this MAC address in this section to replace the WAN
MAC address with the MAC address of that PC (you have to be using that PC
for the Clone MAC Address button to work).
z
MTU
: MTU is the Maximum Transmission Unit. It specifies the largest
packet size permitted for Internet transmission. Enter your MTU number in
the text-box to set the limitation. The default value of MTU is 1492 and use
1300 while the line condition is bad.
z
DNS
: Check "DNS" and enter the IP address to specify DNS server for LAN
DHCP server.
z
Connection Type
: Select your PPPoE connection from these options:
Connect to Internet automatically
: This feature will keep your Internet
connection always alive. The Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically
re-establish your connection. To use this option, click the radio button next
to Auto Connect.
Auto disconnect when idle, time out
: If enabled, the router will trigger
a PPPoE session for connection to the Internet if any client PC on your
WLAN/LAN sends out a request for Internet access. However, the router
