16
TROUBLESHOOTING
•
Your adjustable bed may be obstructed preventing
smooth operation. Remove obstructions from around
and under the bed.
•
Check that the head section is not too close to the wall.
•
If a headboard is installed, check that it is not too close
to the edge of the mattress. Make sure there is enough
distance between the headboard bracket and the
mattress.
Head or foot section elevates
adjustable bed but does not return to
flat position.
•
Check the batteries in the remote control. Replace with
new batteries, if necessary.
•
Make sure that you are following the duty cycle of the
motors. Do not operate for more than two minutes over
a 20-minute period or approximately 10% duty cycle.
•
Press the lift buttons firmly and accurately.
•
Wireless remote control may be experiencing common
radio frequency interference from other radio
transmitting devices. Wait several seconds and then try
pressing the lift buttons again.
Head or foot lift function has minor
interference during operation.
1. Clear any clutter or obstructions under and around
the adjustable bed. Radio frequency interference from
other remotes or electronic devices may affect normal
operation.
2.
Check the batteries in the remote.
3. Press the lift buttons on the remote control firmly and
accurately.
The adjustable bed stutters when in
motion.
In the event the adjustable bed fails to operate, investigate the symptoms and possible solutions below.
SYMPTOM
SOLUTIONS
