10
Assembling the headboard bracket (optional)
IMPORTANT!
•
Failure to follow the installation steps as they appear in this guide could result in damage to your
adjustable bed.
•
For safety reasons, lifting of the adjustable bed must always be performed by two (2) people; and the
unit should always be on a flat surface.
•
Make sure to position the bottom of the headboard cross member no more than
3 inches (76.2 mm) between the headboard and the top of the mattress.
Place your mattress on the adjustable bed.
Your adjustable bed and headboard bracket installation is now complete.
Turn the adjustable bed over with the top side facing
downward.
Remove the leg from the head section of the adjustable bed
by turning the leg counter-clockwise.
Slide the inner headboard bracket over the hole for the leg
attachment. (The bracket opening should face away from the
adjustable bed).
Screw the leg back in, turning clockwise. This will secure the
inner headboard bracket to the adjustable bed.
Place the open side of the outer headboard bracket onto the
exposed square tube of the inner headboard bracket to create
a tight fit.
Insert a retainer bolt fitted with a washer through the outer
headboard bracket and into the inner headboard bracket.
Tighten the bolt with an Allen key wrench. Leave loose enough
for adjusting.
Repeat steps 2 to 6 to install the brackets on the other side of
the head section of the bed frame.
NOTE:
When the headboard brackets are assembled, make
sure there is a space of 1.5 inches (38.1 mm) to 2 inches (50.8
mm) between the edge of the bed frame and the headboard
brackets.
If you need to adjust the headboard brackets, unscrew the
bolts holding the outer headboard bracket and move them
the necessary distance. Screw the bolts and tighten securely.
1
2
3
4
5
6
7
8
INSTALLATION GUIDE
NOTE:
Headboard bracket parts are sold separately.
