Zimmer Z Wave Q, User Manual

Page: 18 / 40

Basic Settings
7
Page 7
Setting Screen
Note: Changes in the basic settings are only possible from the start-up screen
Settings menu Via the Start Screen you get into the settings menu (general), the factory settings can
be individually changed and adjusted
The setting options are described below.
The default settings are pre-programmed as shown in the screen.
(1) Start Settings Individual options of the start menu.
(2) Language Choose language. The selection is made directly in the corresponding line.
(3) Welcome Text Activation of the “Welcome text” field opens a window with an alphanumeric keyboard
for entering a welcome message on the start-up screen.
Activation of the button with the green arrow saves the entered text.
Activation of the button with the red cross takes you back to the configuration menu.
(4) Volume Option to adjust the volume of the signal tones when activating the control panels.
The volume is adjusted via the two arrow keys.
(5) Brightness Option to adjust the brightness of the screen. The brightness is adjusted via the two
arrow keys.
(6) Maintenance Leads to the “maintenance” screen, see following section.
(7) Version Activation of the “Version” button opens a window with information about the current
software version.
(8) Load Default Activation of the “Load default” button restores the default factory settings.
1
2
3
4
5
6
7
8
10
9