Zimmer Z Wave Q, User Manual

Page: 14 / 40

Application Information
3
Page 3
Attention
!
Before using the device on a patient, the user is must be familiar with the instructions
for use and individual treatment methods as well as the intended use /
contraindications, warnings and application information. Additional sources of
information about types of therapy should be consulted.
Attention
!
Before use, ensure that the device is powered via a properly grounded plug with a
grounded outlet. The device must only be operated with the supplied power cord.
The power cord must be protected against mechanical stress.
Attention
!
Magnetic and electrical fields can affect the function of the device. For this reason,
do not operate ZWave
Q
in the vicinity of devices which generate strong
electromagnetic fields (X-ray or diathermy equipment, MRI machines and Radio
Frequency devices). Please keep a safe distance of at least ten feet.
Attention
!
ZWave
Q
is not suitable for use in areas with an explosive, flammable or combustive
atmosphere.
Attention
!
Do not place the device adjacent to heat sources (heating, hot mud products, sauna
etc.), and leave a gap of at least 20 inches between the device and a wall (to allow
for adequate ventilation and cooling).
Attention
!
During use, the device is to be located in a position allowing direct access to the
device´s central main supply so that it can be disconnected from the main supply at
any time.
Attention
!
Only accessories provided by Zimmer MedizinSysteme GmbH must be used.
Attention
!
The silicon protection cap (15mm) for the handpiece H
2
O Slim is only for single use.
Attention
!
The silicon protection cap (39mm) for the handpiece H
2
O Aesthetic should be
carefully cleansed and disinfected between each patient.
Attention
!
These instructions for use should always be kept with the device at all times in order
to give access to the persons responsible for the operation of the device.
Attention
!
No changes may be made to the device during the product’s life unless specifically
recommended by the manufacturer.
Attention
!
The complete medical device is suitable for use in the patient environment.
Attention
!
To disconnect the device from the power supply, disconnect the main plug from the
socket.