71
6.7
Paediatric measurement
Select obstetrics mode [Rep.] to enter it, then enter paediatrics mode. Or press [Change] to switch to the paediatrics
measurement menu
6.7.1
HIP angle
The HIP function is used for evaluating fetal growth. In order to perform a calculation, three lines need to be
added to the image that conform to the fetal anatomic structure. The system will calculate and display two angles for the
doctor’s reference.
Measurement steps:
Select the [HIP angle] menu item and click on it to enter the measurement. Add three distances that are consistent with
the fetal anatomy.
After the above operations are complete, the result of the measured ANGLE will be displayed in the measurement results
area.
CAUTION:
D 3 shows the baseline between the protruding joint and the hipbone
D 2 shows the direct line between the ilium and acetabular bone
D 1 shows the baseline between the joint socket, joint cul-de-sac, periosteum cartilage and ilium.
is the angle between D1 and D 2 (acute angle; is the angle between D 1 and D 3, acute angle.
HIP angle
6.8
GYN measurement and calculation
GYN measurement includes measurement of UT-D (uterus diameter), ENDO (endometrium), CX-L (Uterine cervix
length), LEFT OV and RIGHT OV (volume of left and right ovary) and LEFT FO and RIGHT FO (left and right follicle).
The result is calculated and displayed directly on the screen by measuring the relevant parameters.
Freeze the desired image under the GYN examination, then click on the [Calc] button to enter into GYN measurement
status.