54
5.13.2
Manual loop
Press [FREEZE] to freeze the image and display the cine playback bar; here, move the cursor to manual playback; the
trackball is rolled to the right and the loop is played back page by page in ascending order.
Or press [Forward/Pre] to play.
5.13.3
Automatic loop
After freezing the image, press [Play/Pause] to play, and press again to stop. Press [ENTER] to choose the automatic
playback area required.
5.13.4
Saving and recalling images
1. Press
to save the current image. The image is displayed in the lower half of the screen;
2. If you need to retrieve saved images, move the cursor to the required image and confirm using [ENTER] to retrieve
it; you can also call up saved patient information in order to call up an image – please refer to the chapter Archive
for more information.
5.13.5
Saving and retrieving cines
In freeze-frame status, press
to save a cine; this is then displayed in the bottom half of the screen. Press [EN-
TER] to retrieve the cine again.
5.13.6
Deleting images
After retrieving the images again, press [Delete] to delete the files.
5.13.7
Sending images
After retrieving the images again, press [Send] to send the images to a USB flash disk or to send, save and print the
DICOM.
Tip: Activate DICOM before saving to DICOM and printing.
5.14
Browsing an image
Press
to enter the user interface for browsing image information. Press [ENTER] for each function in the image.