41
The Z icon serves as the orientation position of the probe.
The Z icon on the left means that the first scan line on the left side of the screen corresponds to the probe's initial scan
position; depending on the probe type, this page is marked accordingly on the probe.
5.6.14
THI
TURN THI ON/OFF
5.6.15
AIO
Only press this button to optimise the image.
5.7
B image menu adjustment
Click
on the
[Change]
or
[MENU]
button to enter the menu.
To change a parameter, first select it with the
[MENU] rotary knob
or with the [
Cursor]. Then press
the
[MENU]
button
(the value to be adjusted is displayed in yellow) to change the value. To exit the function, press the
[MENU] button
again.
5.7.1
Scan width
Select [Scan width] and adjust the scan width to the appropriate size.
5.7.2
Focus point
In B mode, up to two focus points can be selected simultaneously, and the number can be controlled by the depth, SRA
and compound.
Move the cursor to the [Focus num] selection to adjust within the range of 1~2.
5.7.3
Persistence
In real-time status, adjust the contrast and resolution.
To set [Persistent], press the selection box displayed. The range is 0~7.
5.7.4
Line density
The scan line density function is only valid an image in B mode, B/B mode, B/M mode or 4B mode. There are two types
of line density: high density and low density. High density means better picture quality, while the low-density picture has
a higher frame rate.
To make the adjustment, please select the submenu item [DENSITY] and press [MENU] to adjust the line density.