Soleo SonoStim / Soleo Galva
Instructions for use
11.1 Electrotherapy with VacoS
11
Page 39
Starting
electrotherapy
By adjusting the intensity from the left intensity regulator, the display changes in the
bottom status line from "ready" to "active" and the therapy is being performed. In the
bar graph, the current flow is displayed and the therapy time counts down at one-
second intervals.
Electrophysiology
therapy end
The end of the treatment period is indicated by an acoustic signal at the end of
treatment, the clock is set to 00:00, the intensity automatically goes to zero and the
bar graph disappears. The display in the lower status bar changes from "active" to
"ready".
The treatment time is activated automatically after the end of therapy.
Note:
The vacuum must be manually stopped using "stop" after the time has ended.
The "stop" button changes to "start".
