Soleo SonoStim – Instructions for
operation
9.1 Electrotherapy
9
Page 26
Therapy startup
By adjusting the intensity from the left intensity regulator, the display changes in the
bottom status line from "ready" to "active" and the therapy is being performed. In
the bar graph, the current flow is displayed and the therapy time counts down at
one-second intervals.
End of therapy
The end of the treatment period is indicated by an acoustic signal at the end of
treatment, the clock is set to 00:00, the intensity automatically goes to zero and the
bar graph disappears. The display in the lower status bar changes from "active" to
"ready".
The treatment time is activated automatically after the end of therapy.
Note:
The vacuum button
is only visible if VacoS is connected to Soleo
SonoStim / Soleo Galva as described in section 7.2 and turned on.
