7 Device Set up
7.2 Installation of cables for VacoS
7
Page 16
Mounting the Vaco
electrode
hose.
Connect the black Vaco electrode hose to the appropriate socket (1) on the front of
VacoS
at
I - .
Connect the red Vaco electrode hose to the appropriate socket (2) on the front of
VacoS
at
I .
Connect the black Vaco electrodes hose to the appropriate socket (3) on the front
of VacoS
at
II - .
Connect the red Vaco electrode hose to the appropriate socket (4) on the front of
VacoS
at
II + .
Insert the Vaco electrode to the connector on the free end of the Vaco electrode
hose.
Assembly
Vaco electrodes
Connect each of the 4 Vaco electrode hoses to each Vaco electrode.
Establish network
connection
Connect the short mains cable to the sockets provided on VacoS (24) and on Soleo
SonoStim / Soleo Galva (14).
Connect the mains
cable
Connect the mains cable to the socket provided on VacoS (25) and connect the
cable to the mains.
Turn the VacoS on
VacoS is switched on via the toggle switch (23).
Note:
Activation of VacoS take place through this window.
The window is only active when VacoS is on.
