en
Puls
briefly
1.2. Quick operation instruction
1
9
Caution
!
When using lubricants, the applicator head must be covered with a
silicone cap to protect it.
Setting
the shock energy
Adjust the shock energy using the left controller.
Starting treatment
Depress the footswitch to start the treatment.
The display in the bottom status bar changes from ‘Ready’ to ‘Active’.
Note:
Only activate the shockwave via the footswitch once the handpiece has
been positioned on the patient.
Ending treatment
Deactivating the footswitch interrupts or ends the treatment. The display
in the bottom status bar changes from ‘Active’ to ‘Ready’.
Note:
During treatment, the patient must be observed closely and the treatment
must be adjusted, if necessary, or discontinued, should any problems
arise.
Summary of Contents for enPuls
Page 1: ...Operating Instructions enPuls Version 2 0 GB...
Page 2: ......
