Zigmund & Shtain FI-64, Installation, Use And Maintenance Instructions

Page: 28 / 102

26
To select the desired temperature, use keys 4 and
5 and then confirm using key 6 or after
7 sec the value will be auto-confirmed.
Pre-set temperature
It is possible to modify the pre-set temperature
assigned for every function.
Using key 4
(or key 2 menu ), go to the
temperature modification mode and set the new
pre-set temperature.
While the display flashes (i.e. within 7 sec),
confirm the value holding key 6 down for at
least 3 sec. The next time the oven is switched on,
there is a new pre-set temperature
Pre-heating the oven
Once the cooking function and temperature have
been selected, using key 3 START the cooking
mode is entered and the pre-heating phase
commences.
The upward temperature icon starts to flash
and the status graphics highlights the
temperature reached by the oven cavity. Once all
of the graphic bars have been filled, a prolonged
acoustic signal informs that the temperature set
has been reached inside the oven and the upward
temperature icon stops flashing.
The stabilised temperature icon appears in its
place .
At this point, the oven maintains the temperature
set constant inside the cavity. If modifications
are made to the temperature of the oven, the
respective upward temperature and
downward temperature icons are activated.
Special functions
Start/pause functions
The key 3 START as already described, is
active after having selected a cooking function
and allows confirmation of all cooking settings
in automatic programming mode; practically, it
starts cooking (START function).
The PAUSE function, represented by the icon,
is always activated with key 3 START and this
can be performed with the oven in cooking mode.
The icon is fixed and the loads are off but
other settings not reset.
After having confirmed any modifications to the
cooking parameter and/or displayed the cooking
status, the pause must be deactivated in order to
continue.
Therefore, press key 3 START again to exit the
pause.
The icon is deactivated. Cooking is thus
resumed and all of the automatic programming,
progressive cooking time and displays are
activated.
ATTENTION
The PAUSE function does not obstruct the
TIMER and ALARM CLOCK functions
while it blocks automatic programming of
time (AUTO functions).
Furthermore, the pause function is activated
automatically in the following cases:
• previously confirmed cooking function change;
• restore missing voltage with oven in cooking
mode;
Oven light control
Standard hinge
Switching the light on is considered a special
function: it is not selected among the cooking
functions.
The light can be switched on and off any time,
even with oven off using key 6 (except when
in programming phase and/or modification of a