Zigmund & Shtain FI-64, Installation, Use And Maintenance Instructions

Page: 16 / 102

14
operating on the set the desired cooking
end time.
After a few seconds, the symbol switches off,
the clock time re-appears and the Auto and
symbols switch on . Now turn the two knobs to the
desired temperature and cooking time.
When the set time is reached, the acoustic
signal indicates the end of cooking, the Man
symbol starts to flash and the oven turns off. To
stop the acoustic signal, operate on any of the
symbols. Press SEL again to exit programming.
Programming can be annulled by taking the
cooking time to 0:00 .
Automatic operation (deferred
cooking start setting)
Operate on the SEL symbol until the appearance
of flashing set the desired cooking time (using
). Still using SEL go to the flashing symbol
and set the desired cooking end time.
After a few seconds, the symbol switches off
the clock time re-appears and the Auto symbol
switches on. Turn the knobs onto the desired
functions and temperatures. The oven remains
off and will turn on automatically according to
what you set.
When the set time is reached, the acoustic signal
indicates the end of cooking, the Man symbol
starts to flash and the oven turns off. Turn the
knobs to the off position. To stop the acoustic
signal, touch any of the symbols. Press SEL
again to exit programming. Programming can be
annulled by taking the cooking time to 0:00 .
Timer function
Operate on the SEL symbol until the flashing
symbol, the numbers 0:00 and the min:sec
symbols appear. By touching the symbols, the
desired time is set. The programmer will start the
countdown. On reaching the time set, the acoustic
signal is triggered. Touch any symbol indifferently
to stop the acoustic signal. To annul this function,
take the timer to 0:00 . This function can be used
for manual cooking.
Acoustic signal
To stop the acoustic signal, touch one of the
three boxed symbols SEL . It is possible to
adjust the volume of the signal to three levels, as
follows. Operate on the SEL symbol until the letter
L appears, followed by the level currently set (from
L1 to L3 ). Touch the symbols to set the
desired level
Child safety or accidental contacts
It is a function that can block access to the
functionality of the electronic programmer keys
both when the oven is running and when the oven
is off.
When, by operating for approx. 5 seconds on
the symbol this function activates, (the
symbol lights up), this prevents children or other
persons from pressing the programmer keys
and modifying the previous program or from
starting the oven that is off. Operate in the same
way to deactivate it. In manual position ( Man ),
lactivation of the lock does not allow use of the
oven. Consequently, with the timer function, the
lock cannot be activated.
NOTE: the lock must be deactivated for access
to a set program.
This remains active even after a power
cut, which switches the programmer off.