13
ProBee-ZS10 User Guide Rev.1.1
Step2. Slide the battery pack into the ZS10 slot.
Figure 2-6 Attach the battery pack
Step3. Fasten the battery pack to the ZS10.
Figure 2-7 Fasten the battery pack
2.2
Configuration
2.2.1
LED
RS232-Tx and RS232-Rx LED will flash accordingly when data is transmitted. For small data
transmissions, it may be hard to recognize the quick flashing action of the LED. Charge Led and Low
battery LED will be off, if you don’t use battery pack. The LED indicators are as follows.
Table 2-1 The ProBee-ZS10 LED Indicators
LED
Description
Power
Power LED turns ON when pow er is supplied. If the node is set to an end-device, it will
