Operating instructions type-lines CXE/AVC (E)
Date 0917
TBL02_13-GB 0917
Art.-Nr. 00153342-GB
Seite 39 / 63
12. Controller Setup
12.1 PIN Protection
The adjustments for the installation in the service level can be protected against unintentional modifications. To do this,
activate the „PIN protection“.
In order to simplify the initial start-up operation, the service level in the factory setting is free – i.e. accessible without
PIN 0010.
After installation of the device has been carried out, PIN protection should be activated!
12.2 Set protection
The „Settings” menu for the user’s basic settings (Setpoint, default value, min, max ..) are freely accessible when using
the factory settings (i.e. without PIN).
If necessary, these can also be protected against unauthorized modifications by using a PIN (1234). For this, the
settings protection must be programmed to „ON”. The settings menu is then no longer visible without inputting a PIN!
Function only in combination with activated PIN protection!
12.3 Save user settings
The individually made device configurations (User Settings) can be saved and, with the corresponding PIN input
(
9090
), can be reestablished (
)
Start
→
PIN input).
.
Important
information!
By entering PIN
9095
in the „PIN“ menu in the start menu-group, the device is entirely reset to the pre-
delivery condition
Any
changes that have been made to the settings are thus lost!
Menu „
Setting“ if Set-protection „ON“ only after PIN Input (1234) visible
Start INFO Setting Events
: : : :
Start INFO Setting
Events
Base setup
Controller
Setup
IO
- - - -
PIN Input
: : : .
OFF
PIN-Protection
: : : . :
User level Servicelevel
PIN
0010
necessary
PIN
Protection ON
PIN
Protection OFF