B. Specifications
54
MECHANICAL
Card Dimensions and Weight
ZT 8952 meets the STD 32 bus specification for all mechanical parameters. In a card
cage with 0.625 inch spacing the ZT 8952 requires one card slot as a stand-alone card.
As an integrated hard disk controller it requires up to 4 slots. Configurations and card
slot requirements are shown in "
Current, Environmental, and Mechanical Requirements
"
table.
Board Length ...............................6.5000 ± .010
Board Width .................................4.500 ± 0.010
Board Thickness ..........................0.062 ± 0.008
Board dimensions are shown in figure "Board Dimensions" below.
COMPONENT SIDE
6.50
.25
4.50
2 X 0.400
3.610
0.06 R MAX 2 PL
0.15 X 45 CHAM 3 PL
0.015 X 45 BEVEL
BOTH EDGES
0.015 X 45
CHAM. 2 PL
.445
TOLERANCES .XXX = ± .003 INCHES
0.100 FROM EDGE, NO
COMPONENT PLACEMENT
2 PL
o
o
o
.XX = ± .01 INCHES
.062 ± .007
4.055
.25
Board Dimensions
Connectors
The ZT 8952 includes four connectors plus the backplane interface connector. The
backplane interface is compatible with the STD 32 specification.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
