166 of 228
MAINTENANCE AND USE MANUAL
furnace DM
EN
B.
Press
ENTER
(
28
). The current day of the week appears on the display (
11
).
C.
Key in the desired day (1: Monday, 2: Tuesday, 3: Wednesday, 4: Thursday, 5: Friday; 6:
Saturday, 7: Sunday).
• The relevant day appears on the display (
11
).
D.
Press
ENTER
(
28
):
• for a fraction of a second the legend “hh.nn” appears on the display (
11
). This is followed
by the current time.
E.
Program the time for the selected day by keying in the relevant numbers.
F.
Press
ENTER
(
28
) to save the data:
• the oven start day remains on the display (
11
).
To check the start time press “
HR.MIN
” (
10
).
The two numbers on the left-hand side of the display (11) give the hour while
the two numbers to the right show the minutes.
If, for example, you wish to enter the time 08.30 key in 0 – 8 – 3 - 0 so that
the number 8 remains on the left-hand side of the display (11).
24 hours prior to the start of oven heating the start time appears on the
display (11). 1 hour before heating a flashing countdown of the remaining
minutes appears on the display (11).
If a delay time of less than 24 hours is set the heating start time is shown on
the display (11).
There are two different ways of starting the oven:
A.
With the oven
OFF
, press
START-STOP
(
20
). The legend “
tImE
” appears on the display (
11
).
• Press
ENTER
(
28
). The current day of the week appears on the display (
11
).
• Press
ENTER
(
28
). The “hh.nn” legend appears on the display (
11
) for a fraction of a
second followed by the current time.
• Press
ENTER
(
28
) and the oven will start working.
B.
With the oven
OFF
, press
PHASE
(
13
). The legend “
F
” appears on the display (
15
).
Press
START-STOP
(
20
) and the oven starts working.
To modify the clock from daylight saving time to summer time and vice versa proceed as follows:
• with the oven
OFF
press the
HR-MIN
key (
10
).
• the legend “
tImE
” appears on the display (
11
).
• press
ENTER
(
28
). The display (
11
) shows
SOL
(= daylight saving time) or
LEG
(= summer
time).
• press
PROG.
(
19
) to change the time.
• press
ENTER
(
28
): for a fraction of a second the “hh.nn” legend appears on the display (
11
),
followed immediately by the current time.
• press
ENTER
(
28
) and the oven returns to OFF mode.
7.6
IMMEDIATE START
