161 of 228
MAINTENANCE AND USE MANUAL
furnace DM
EN
Failure to observe any of the above equipment installation instructions may
lead to malfunctions and render the warranty null and void.
If the control panel is already on and there are four numbers on the
display (11) press the START-STOP key (20) immediately and the word
OFF will appear on the display (11).
6.6
PURPOSE OF THE EQUIPMENT / IMPROPER AND FORBIDDEN USE
The ovens of the
DM
series have been designed to effect the firing and/or fusion of lining
cylinders used in odontotechny.
Using the equipment for any purpose other than that described in this Manual
shall be considered improper and thus forbidden.
The equipment must not be used to fire materials that generate smoke (e.g.
waxes, resins, plastics etc.).
Improper use renders the Warranty null and void and
Zhermack S.p.A.
shall not
be liable for any damages to objects, workers or third parties.
The main reasons for which the Warranty may be rendered null and void are given in section
2.2 and in the "Warranty Certificate" enclosed with this Manual.
11
16
14
15
Figure
6
Fig. 6 :
Press the main switch (
16
) positioned on the
display: the switch will light up.
• the word OFF appears on the display (
11
)
• the program number appears on the display (
14
)
• the number “
1
” appears on the display (
15
).
Figure
5
Fig. 5 :
On
DM 1
and
DM 1G
ovens act on the main
switch by turning the dial clockwise.
