160 of 228
MAINTENANCE AND USE MANUAL
furnace DM
EN
6.5
STARTING UP THE EQUIPMENT
Figure
3
Fig. 3 :
Position the equipment correctly in the
designated area, observing the instructions in
paragraphs 6.3 and 6.3.1.
Connect the lead to the mains power
socket: follow the instructions in
section 6.4 carefully.
B
Figure
4
Fig. 4 :
Open the oven door using the handle (
B
).
After placing the grooved plate and the refractory
supports (see diagram) inside the oven, insert the firing
cylinders and close the door properly.
Even when the
DM
oven is at ambient
temperature it is still advisable to use
protective gloves during handling.
6.4.1 Connecting up the aspiration unit (optional for DM 30-40-50, DM 4R)
Figure
1
Fig. 1 :
Remove the bleeder from its seat and
connect up the aspirator using the screws
supplied with the aspirator itself.
Figure
2
Fig. 2 :
Finally, insert the aspirator plug in the socket
on the rear panel of the oven base.
