5
Parameter
Description
Password
Note:
For ONVIF protocol, you must enter the username and
password correctly.
For Uniview protocol, the NVR will add cameras using
“admin” as the username and password by default, if
the user information is not “admin”, you can enter the
correct information and add the camera, you may also
use the default login information so that the NVR will
automatically change the login information into
“admin”.
Forward Mult-IP
IP address and port number of the multicast group for
forwarding audio/video streams.
The combination of the IP address and port number of
the multicast group must be unique in the system.
Forward Mult-Port
3.
After you have completed the settings, click
OK
.
Searching and Adding a Camera
1.
Click the
Search
button. The
Search
page is displayed.
Figure 1-7
Search Page
2.
Make a quick search or search a specified network segment:
To make a quick search, click the
Quick Search
button.
To search a network segment, click the
Search in Network Segment
button and then set the
start and end addresses of the network segment.
3.
After the camera is found, click
in the
Add Device
column. For a third-party IPC, the
Add
Third–Party IPC
page is displayed. For a Uniview camera, a pop-up menu appears after you
click
, where you can choose the protocol. If you choose the Uniview protocol, the
Add
IPC
page is displayed. The following shows some examples.
