Part IV Setting Parameters
BECS-129S Singular-head Computerized Embroidery Machine
49
embroidery effects. The user can set these parameters according to different
machine parameters, electric parameters and fabric thickness.
Max. Speed At Jump: (Options: 400, 450, 500, 550, 600, 650, 700, 750)
This is to limit the main shaft speed when the machine meets jump stitch
code during the process of high speed embroidery.
Start Run Speed:
This parameter is
fixed, and it can’t be changed.
Start Slow Sti. Num.: (Options: 1~5)
This parameter is to set how many slow start-up stitches are at the startup.
Acceleration: (Options: 1~12)
This parameter is to set the degree of acceleration after the slow startup
stitches. The larger the parameter value is, the faster the machine speed rise
from the startup speed to the maximum speed.
Adjust Speed:
Reserved parameter, unable to be changed.
Adjust Stop Pos.: (Options: 0~ 20)
This parameter is to trim the stop position of main shafts to ensure the
main shafts with different mechanism inertias are able to stop at the right stop
position. The user can increase the parameter value to stop the main shaft at a
larger angle. The user can adjust the value between 0 and 20 depending on
whether the stop position exceeds the stop angle.
Needles In A Head: (Options: 3~15)
Summary of Contents for BECS-129S
Page 4: ......
