Part IV Setting Parameters
BECS-129S Singular-head Computerized Embroidery Machine
43
the process of work. When the parameter is set as “No”, it means the machine
will only carry out the action of jumping (no trimming action will be done).
Under the premise of the setting at figure among 1 to 7, if the continuous
jump stitches are less than the set value, there will be only jumping and no
trim; if the continuous stitches are larger than or as same as the set value,
there will be jumping to trim.
When having the jumping action only (no trim), the machine will jump
stitch in case of the jump stitch codes; if it is set at jumping to trim, the
machine will take action the same as that at over-frame
——
The machine
will automatically stop, move frame and automatically start again.
Thread broken detect: (Options: 3~7, No)
When this parameter is set as "Yes", the machine will automatically judge
whether there is thread broken. If the broken thread exists, the machine will
stop automatically and show the thread broken icon. “3~7” is to set stitches
number when the machine will begin to test after the thread broken. When the
parameter is set as “No”, the machine won’t test whether the thread is broken.
Thread Broken Sensitivity (Options: Low, High)
This can help to improve the sensitivity of thread broken detection.
Thread Broken Back Stitches: (Options: 0~9)
The parameter is to set how many stitches the machine will automatically
return when the machine detects a thread break and stops automatically in
case “Thr. Broken Detect” is set within “3~7”. If the parameter value is 0,
Summary of Contents for BECS-129S
Page 4: ......