Zhejiang Sansilou Industrial BECS-129S, Manual, Page: 39 / 112

Part IV Setting Parameters
BECS-129S Singular-head Computerized Embroidery Machine
35
⑴
Under the “ ” status enter the parameter menu (e.g. by
pressing“ ”).
Press“ ” key to select the parameter of repetition and confirm the
selection by pressing “ ”. A square cursor shows where to input:
⑵
Press the keys “ ” to select the prior repetition direction
between X and Y, and then press “ ” to confirm. For an example, press
“ ” to set the repetition direction as “Y” direction, which is shown in the
following picture.
Press
⑶
“ ” to set the Repetition Times. Input the number where a
cursor “_” is lying.