Part III Basic Knowledge and Operation
BECS-129S Singular-head Computerized Embroidery Machine
26
3.3 Select Memory Design for Embroidery
Before embroidering, you have to select a design and confirm it first.
Operation:
⑴
In the main screen, ensure that the system is under the status "
". If
not, press "
" and "
"to return to the embroidery preparation status
"
".
⑵
Press "
" to enter the design operation menu:
Press "
"to enter the first menu item and the following prompt will
appear. If you have known the number of the design intended to be
embroidered in memory, you can input the number by pressing the numerical
keys, e.g. keys “1” and “5” for No. 15, and then confirm the input by “
”. If
design No.15 exists, it will be set for embroidery and the screen will switch to
the parameter settting menu (refer to Part IV). If design No.15 doesn’t exist,
the confirmation operation won’t be accepted. Then you need to press “
"
to clear and then input/select a new number.
Summary of Contents for BECS-129S
Page 4: ......
