Installation and operating instructions
41
9.3 Display messages
Along with the various operating states, various messages may be shown on the
display as follows.
State
Error code
Description
Causes
Initializat-
ion
Waiting
Initial PV voltage is between Min. DC
input voltage and start-up DC input
voltage of the inverter.
Checking
The inverter is checking feeding
conditions after initial PV voltage
exceeds start-up DC input voltage of
the inverter.
Reconnect
The inverter is checking feeding
conditions after the last fault has been
solved.
Normal
Normal
The inverter is operating normally.
Fault
9
GFCI Fault
GFCI detection circuit is abnormal.
8
AC HCT Fault
Output current sensor is abnormal.
46
High DC Bus
The voltage of DC Bus exceeds the
permitted upper limit.
35
Utility Loss
The utility cannot be detected, which
may be caused by no utility, grid
disconnected, AC cable damage, fuse
broken or island.
40
Over Temp.
The internal temperature exceeds the
permitted value.
33
Fac Fault
The grid frequency lies outside the
permitted range.
34
Vac Fault
The grid voltage lies outside the
permitted range.
37
PV Overvoltage
The voltage of the strings exceeds the
permitted upper limit.
36
Ground Fault
The residual current exceeds the
permitted upper limit.
Summary of Contents for Eversol-TLC 10K
Page 1: ......
