Zetor PROXIMA PLUS 10541, Operator'S Manual

Page: 79 / 223

79
TRANSPORTATION USE
E310 E311 E312
ATTACHMENT OF ONE-AXLE
TRAILER
It is carried out by means of the hydraulic
inner circuit lever (A) with selected posi-
tion regulation. The hitch hook together
with trailer tow ring is hydraulically raised
into position where the latches lock down
under the hitch carrier pins. Hydraulic
arms must be subsequently lowered so
that the hook latches could seat into
carrier pins - telescopic pull rods must
not be stretched.
DISCONNECTION OF ONE-AXLE
TRAILER
Disconnecting is made after slight lower-
ing of the hitch by hydraulic inner circuit
lever with selected position regulation.
Move the hitch control lever rearwards.
The lever is located to left hand side
from the driver’s seat. Use the hydraulic
inner circuit lever to lower the hitch and
disconnect the trailer tow ring.
∗
DRAW BAR
The draw bar is height adjustable by the
hydraulic lifting system within its whole
lifting range. Only those agricultural
implements that permanently load the
drawbar downwards can be attached to
the draw bar.
Remove the multi-stage hitch and
swinging draw bar when working
with the draw bar.