Zetor PROXIMA PLUS 10541, Operator'S Manual

Page: 150 / 223

150
TRACTOR MAINTENANCE
INSPECTION AND MAINTENANCE OF TRACTOR 5
After every operating hours
Inspection and maintenance operations
10 70
100 250 600
1200 1800 2400 3000 3600 4200 4800 5400 6000
Check of alternator, bearings, rectifiers and collectors X X
2 Greasing of bearings of lever mechanism of front and rear wipers X X X X X
SAFETY CAB AND TRACTOR ACCESSORIES
Check of clearances in complete system of hydrostatic steering X X Every 200 hours
Check of driver’s seat for function, greasing of moving parts X Every 200 hours
8 Check of hydraulic seat shock absorber for leaks X X
Oil change in driver’s seat shock absorber X X X
Greasing of door hinges, rear window, door pins and locks X X X X X X X X X X
Greasing of trailer hitch automatic mouth X Every 200 hours
Greasing of one-axle hitch and control Bowden cable X X X X X X X X X X
Check and possible cleaning of air filters of cab ventilation X Every 10 hours
Check of hitching and attaching equipment including trailer for condition X Every 10 hours
Greasing of heating fan bearings X Every 600 hours
Notes:
∗
After first putting into operation of a new tractor or on tractor after general overhaul.
1. When working with front attached implements, make the cleaning daily and/or at shorter intervals according to stage of pollution.
2. Maximum period – two years.
3. Change hoses after four years from the date of the hose production at the latest.
4. New hoses must not be older than two years from the date of the hose production, as mentioned on the hose surface.
5. Maximum period – five years from the date of the tractor production.
6. Maximum period – five years from the date of the air tank production or after crash.
7. This includes adjustment of front asymmetric headlight and adjustment of clearances at brake indicator light switches (maxi-
mum clearance between the switch and foot brake pedal stop must be 0,5 to 1,0 mm).
8. In summer season - every 100 hours.
9. In case of fluid leakage, remove the faulty piston rod seal, flush out the shock absorber with petrol and fill with 70 cm
3
of
shock absorber oil.