Zetor MAJOR HS Series, Operator'S Manual

Page: 80 / 140

Rear three-point linkage
Safety principles when working with a three-point linkage
Vertical adjusment of lifting draw bars
It is used for connection of the carried half-carried
agricultural machines and tools with hitch points of
category II according to ISO.
1. Upper pull rod
2. Lifting pull rod left
3. Lifting pull rod right
4. Limiting pull rods
5. Lower pull rods
category II
hinge axis length 870 mm
diameter of holes of
connecting balls of the
lower pull rods according
to ISO 28 mm
hole diameter of upper
pull rod 25 mm
NM13N053
Persons who are not charged with work with
auxiliary device of a tractor must not stand between
a tractor and connected machinery (tools) - (A).
Do not park tractor with mounted tools in a lifted
position (B). When driving without tools it is neces-
sary to connect lower draw bars (5) by springs and
upper draw bars (1) to be placed to a flexible linkage!
When transporting tools it is necessary to adjust
limiting draw bars (4) of lower draw bars so that there
would be no unwanted side movement of tools!
NM13N102
For vertical adjustment of lifting draw bars protrude
a beam (1) in the direction of an arrow and by turning
a beam do the setting.
E453
HITCHES
79