Zetor MAJOR HS Series, Operator'S Manual

Page: 19 / 140

Aggregation tractor - machine/trailer
While working with machines, trailers or semi-trailers, all instructions from the manufacturers
of these aggregations must be adhered to!
Tractors equipped with front end loader
Zetor Tractors in standard design are designed for utilization in agriculture and are not designed for special
purposes.
Tractors designed for operation within the European Union must be equipped, in case of using front end
loader, with a protective structure (FOPS - Falling Object Protective Structure) protecting drivers from
potential falling objects.
It is necessary to observe applicable local valid regulations in countries which are not part of the European
Union.
Two types of cab roofs are mounted to Zetor tractors.
1. Standard cab roof
2. Cab roof designed for tractors equipped with front end loader meeting the OECD code 10 (FOPS)
conditions.
Tractors ZETOR supplied already from production with front end loader are equipped with cab roof according
to point 2. From safety reasons, series ZETOR tractors supplied without front end loader with standard roof
pursuant to point 1 must not be equipped or used with front end loader. In case of additional front end loader
assembly, it is necessary to equip tractor with cab roof pursuant to point 2.
Only front end loaders approved by ZETOR TRACTORS may be mounted to ZETOR tractor.
Additional assembly of front end loader approved by ZETOR TRACTORS can be done only by
authorized ZETOR service.
It is forbidden to use front end loaders unapproved of by ZETOR TRACTORS.
Not observing this instruction may cause serious accidents.
Carefully observe instructions for use supplied by the manufacturer of front end loader.
Attachment points for assembly of the front loader to the tractor are specified in the manual of
the loader manufacturer. The manual must be approved by the company ZETOR TRACTORS.
USER´S SAFETY INSTRUCTIONS
18