manualshive.com logo in svg

Zetor 106 41 forterra turbo, Operator'S Manual, Page: 182 / 257

Share
Download
Zetor 106 41 forterra turbo Operator'S Manual Download Page 182

182

HINTS FOR MAINTENANCE

RECOMMENDED INFLATION OF THE FRONT WHEEL TIRES

The admissible loading capacity of the front axle may not exceed the sum of loading capacities of the two tires mounted on the
axle. The admissible loading capacities are specified in the ”Main technical parameters” of the respective type of tractor. The
tractor individual axles may not be furnished with tires of different sizes and designs (diagonal combined with radial ones).

Tire dimensions and versions

Prevailing type of opera-
tion

12,4-24
8 PR

12,4R24

13,6R24

For the field applications

inflation (kPa)

100-170

130-160

130-160

load. cap. (kg)

895-1200

1190-1360

1270-1450

For road transportation

inflation (kPa)

200-250

130-160

130-160

load. cap. (kg)

1330-1415

1190-1360

1270-1450

For the jobs with the
front loader at the max 8
km/h admissible speed

-1

inflation (kPa)

290

max. 200

max.200

load. cap. (kg)

max. 2830

max. 2040

max.1910

Tire dimensions and versions

Prevailing type of opera-
tion

14,9R24

380/70R24

420/70R24

12,4-28
10PR

For the field applications

inflation (kPa)

130-160

130-160

130-160

130-170

load. cap. (kg)

1490-1700

1445-1650

1665-1900

1085-1275

For road transportation

inflation (kPa)

130-160

190

190

170-280

load. cap. (kg)

1490-1700

(1445)-1650 (1665)-1900

1275-1790

For the jobs with the
front loader at the max 8
km/h admissible speed

-1

inflation (kPa)

max. 200

max. 200

max. 200

max. 280

load. cap. (kg)

max. 2550

max. 2300

max. 2300

max. 2500

Note:

The tire 380/70R24 is a dimensional equivalent of the tire 13,6R24.

 The tire 420/70R24 is a dimensional equivalent of the tire 14,9R24.

The specified loading capabilities of tires for the field applications and road transportation correspond to the tractor max. travel
speed, i.e. in the case of the radial tires 40 km/h; in the case of diagonal tires 30 km/h. The specified values refer to one tire For
the tractor the max. loading capacity per axle may not exceed the maximum loading capacity of the tire.

Summary of Contents for 106 41 forterra turbo


































































































































































































































































Reviews:

No comments