Smart Connect
Single loop touch screen panel
Doc: GLT-229-7-2
26
Issue: 1
Date: 11/03/2016
Design Certificate
(Page 1 of 2)
Certificate of DESIGN for the Zeta Smart Connect Fire Alarm System installed at:
ADDRESS:
I/we being the competent person(s) responsible (as indicated by my/our signatures below) for the design of
the fire alarm system, particulars of which are set out below, CERTIFY that the said design for which I/we
have been responsible complies to the best of my/our knowledge and belief with the recommendations of
section 2 of BS 5839-1 for the system category described below, except for the variations, if any, stated in
this certificate
Name (
Block Letters
):
Position:
Signature:
Date:
For & on behalf of:
Address
The extent of liability of the signatory is limited to the system described below.
System Category (see BS 5839-1, Clause 5):
Variations from the recommendations of section 2 of BS 5839-1 (see Clause 7):)
Extent of system covered by this certificate:
Brief description of areas protected (not applicable for Category M, L1 or P1 systems):
