Zeta Alarm Systems.
Classic 2000 Mk II Operation Manual
Revision 1.0
Part # MAN-Z3K-01
Page 14
1.5.2.3 System Timing Options
Establish 4 Day/Night sensitivity schedules
Establish up to 18 Holidays
Establish up to 4 System timing schedules
Auto-Silence
Silence Inhibit
Alarm Verification
1.5.2.4 Input Point Programming
Each sensor allows programming of the following parameters:
40-character label
Alarm verification enable/disable
High, medium or low sensitivity selection
Temperature set point in the temperature sensor (H, M, L between 130 and 195 degrees)
Output group assignment
Selection of Day/Night sensitivity schedule (Photo, Ion and Heat Sensors)
Each switch monitor module or input point on the conventional zones may be programmed with a
40-character label, and for one of 10 different functions:
Alarm input
Manual pull station
Waterflow Alarm
Supervisory Alarm Input
Drill Test Input
Remote Silence
Remote Reset Input
Control Input
Control NL (Non-Latching)
Supervisory NL (Non-Latching)
Photo sensors may be programmed as Duct “T” (Trouble) or Duct “S” (Supervisory)
1.5.2.5 SLC Output Point Programming
Each output point allows programming of the following parameters:
Select for the “All-call” group,
Define silence operation
Select for one of 4 output schedules
Associate with up to 5 output groups
Provided a 40-character courtesy label
1.5.2.6 Output Groups
The panel accommodates up to 199 output groups. Each output group provides the following
options:
Enable/disable
Floor number selection
20-character courtesy label (the courtesy label is for reference only, and is only visible when
viewing group status, or on printed programming reports, NOT when the group is activated
Alarm count
Summary of Contents for Classic 2000 MKII
Page 2: ...Page 2 of 2...
