Zeta Alarm Systems Simplicity Plus 64 Installation Manual Download Page 8 | Manualshive

Page: 8 / 50

background image

SIMPLICITY PLUS INSTALLATION MANUAL

Approved Document No: GLT.MAN-107

PAGE 7

Issue 3.16 Author: NRPJ Date: 21/09/2017

4. USING THIS MANUAL

It is beyond the scope of this manual to teach the user all the intricacies of fire alarm system design. If in doubt about
what is required, read BS 5839: Pt 1: 2013 “Fire Detection and Alarm Systems for buildings - Part 1: Code of Practice for
Design, Installation, commissioning and maintenance of systems in non-domestic premises” available from the BSI, or at
your local reference library. Other national regulations will also give similar guidance.
This manual explains, in a step-by-step manner, the procedure for the basic design and installation of the

Simplicity Plus

Range of Fire Alarm Control Panels.
It gives detailed instructions on how to use all the features on this fire alarm panel.
For operational and maintenance information, please refer to document GLT.MAN-108 (USER MANUAL, MAINTENANCE
GUIDE & LOG BOOK). It also contains a System set-up table, and Installation Certificate, that must be completed by the
Commissioning Engineer prior to system handover.

Unlike the User Manual, this Installation Manual must not be left accessible to the User.

4.1 EQUIPMENT GUARANTEE

If this equipment is not fitted and commissioned according to our guidelines, and the relevant National Standards, by an
approved and competent person or organisation, the warranty may become void.

«
...
6
7
8
9
10
...
»

Summary of Contents for Simplicity Plus 64



















































Reviews:

No comments

Related manuals for Simplicity Plus 64

Brand: Signalink Pages: 2

Brand: Teknim Pages: 3

Brand: United Technologies Pages: 2

Brand: Panasonic Pages: 2

Brand: VES Pages: 24

Elite-RS H-Series

Brand: VES Pages: 156

Brand: White Rodgers Pages: 4

Brand: Summit Pages: 52

Brand: DSC Pages: 8

Brand: Fike Pages: 175

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands