Release Date: 05/01/2021
Rev:01
Warnings
General
✓
Read this manual carefully before operating the device and retain it for future reference
✓
Pay attention to all warnings and precautions described in the manual.
✓
Keep devices away from water and moisture utunuz.
Service
Do not attempt to repair the device by yourself, you may be exposed to electric shock if you open the device
cover.
In the event of any malfunction, contact your dealer or authorized service. Technical intervention to the device
must be performed by qualified service personnel.
Fault Conditions Requiring Service
In the event of any malfunction or in the following cases, contact your authorized service or dealer.
✓
When the power cord or plug is damaged,
✓
When any liquid flows into the device or the object falls,
✓
When exposed to water and rain,
✓
If the device has been dropped or the housing has been damaged
✓
If the device has noticeable performance changes,
✓
If the device does not operate normally according to the operating instructions specified
Call for service as incorrect operations can cause other malfunctions.
Maintenance on your own
Do not try to fix the device on your own. Removal of cover may end up with electricity shock. In case of any
defect or malfunction, contact with your dealer or with authorized service. All the technical interventions have
to be done by technicians of company. Device must be cleaned up with a dry fabric. No-chemicals are allowed
for cleaning.
Transportation
Device must be carefully transported avoiding all physical bump, stroke and possible fluid entry. Malfunctions
that caused by improper transportation is not under warranty.
Human and Environmental Health
This device contains no chemical or biological elements that could harm human condition.
Sub Models
TFS-1182R
Intelligent Addressable Sounder & Flasher with Built-in Isolator, RED
TFS-1182W
Intelligent Addressable Sounder & Flasher with Built-in Isolator, WHITE
Technical Features
Power
15VDC
–
32VDC (Nom.27VDC)
Current Consumption
~90 µA ( @27
VDC )
Start Time
15 sec.
Alarm Consumption (Default Tone)
~Min.=6.74mA, Nom.=11.06Ma, Max.=15.1mA.(27VDC )
Sound Level
89.4 / 94.3 / 97
dB±
2 dB (@27VDC, at 1 meter)
Sound Tone
42 Different Tone
Flash Mode
3 (Slow, Normal, Fast)
Protection Class
IP21C
Operating Temperature Range
-10
C ~ 55
C
Humudity
Between %0 - %95 at
+40°C
Dimentions (mm)
Ø:110mm, h:55mm (
Include Base Bracket)
Body Material
Red
–
Transparent, UL94 Policarbonite
White, UL94 Policarbonite
Cable Selection
0.8mm ² ~ 1.5mm ²
Weight (W
–
WO Base)
207.7Gr.
Leds
Wide Range 7 Bright LED
Heart Led
20s period - 1182R: RED, 1182W: White
Piezo
Sealed Piezo
Coverage
W-2,4-4
Usage
Internal Usage / Siren Type : Type A
Isolator
Avarage Consumption @24V
15uA
Vmax.
32V
Vnom.
28V
Vmin.
15V
Vso_max.
18V
Vso_min.
9V
Vsc_max.
5V
Vsc_min.
0,7V
Ic_max.
0,5A
Is_max.
3A
IL_max.
0,026A
Zc_max.
0,026Ω
Indicator Lights
White Led
RED / White LEDs
(7 pcs)
Yellow LEDs
The device is in normal working
condition (can be off through CP)
20s Flashing
x
X
Alarm Condition
X
Yes
X
Shortcircuit
X
X
Constant Lit
Terminals
1 -
Loop (-) IN
2 -
Loop (-) OUT
3 -
4 -
Loop (+) IN, OUT
Attention: Do not attempt to remove the card from its plastic housing. Completely closed for
your safety. Users must avoid Intervention
.
TFS-1182R / TFS-1182W
Intelligent Addressable Fire Alarm Sounder &
Flasher With Built-in Isolator
Installation Manual
