I2C-SPI Control Center
User Manual V1.02
User Guide
fo
r Zeroplus Technology I2C-SPI Control Center
27/67
FMO7I5A
4
Operating Instructions
4.1
Steps for Hardware Connection
In the case of I2C and SPI Operations, it is necessary to connect two hardware devices synchronously
to perform the corresponding operations; the I2C-SPI Control Center can be used as a Master or Slave.
STEP 1. Connect the device, and then plug the device into the USB Port on the PC.
STEP 2. Install the Driver automatically (the Driver needs to be installed when the devices are plugged
into the PC for the first time).
STEP 3. Connect the corresponding pins; refer to the Chapter 2, Hardware Installation and Software
Installation.
STEP 4. Open a Software Window, select a Device from the pull-down menu, and then press the
Connect button.
Summary of Contents for I2C-SPI
Page 1: ......
