I2C-SPI Control Center
User Manual V1.02
User Guide
fo
r Zeroplus Technology I2C-SPI Control Center
47/67
FMO7I5A
STEP 3.
Press the Enable button to use the set Trigger Conditions.
The results are displayed by the ZEROPLUS Logic Analyzer as below figure:
Remark: When the data meets the abovementioned set Trigger Conditions, the Target Power (the Pin is
connected with the Trigger Signal of the Logic Analyzer) will transmit a Change Edge (Rising Edge or
Falling Edge). For example, when the Trigger transmits a Falling Edge and the Conditions meet the
Data 11, 22, 33, 44, 55 and 66 synchronously, the T Bar will stop at the position, see the above figure.
Summary of Contents for I2C-SPI
Page 1: ......
