I2C-SPI Control Center
User Manual V1.02
User Guide
fo
r Zeroplus Technology I2C-SPI Control Center
38/67
FMO7I5A
(3)
I2C Trigger
Notice: 1. When the I2C Trigger is used, the external GPIO Mode Switch should be set to 8 Pin, and the
I/O Ctrl is used as the Output Pin of the Trigger Signal at this moment.
2. When the Trigger Conditions are satisfied, the transferred time from the end of the last Clock
to the I/O CTRL is 14uS ±0.3uS.
3. When the Trigger function is used in the I2C Slave Mode, the interval time between two Bytes
should be longer than 14uS.
STEP 1.
Select the I2C Trigger Page on the I2C Mode.
Summary of Contents for I2C-SPI
Page 1: ......
